â??Tri-color LED indicator for clear, visible feedback of calling, scanning and monitoring.
- Emergency button to alert supervisor or dispatcher in an emergency situation.
- New accessory connector meets IP57 submersibility specifications and incorporates RF, USB and enhanced audio capability.
- DP 3401 includes integrated GPS module.
- Radio housing meets IP57 specifications; submersible in 1 metre of water up to 30 minutes.
- Powerful, front projecting speaker.
- Three side programmable buttons for easy access to favourite features. New features such as one-touch calling and quick text messaging are made even easier through programmable button access.
- Large, textured push-to-talk button. Provides good tactile response and easy access, even when wearing gloves.
- 32 channels.
â??Non-display Portable Radio Standard Package
- Non-display Portable Radio
- Antenna - Standard whip included with DP 3400;
- GPS Monopole included with DP 3401
- NiMH 1300 mAh Battery
- IMPRES™ Single Unit Charger
- 2.5” Belt Clip
- Quick Reference Guide
â??Additional Features
- Enhanced call management
Encode: emergency, push-to-talk
ID Decode: radio check, remote monitor, radio disable, all call
- Dual-mode analogue/digital scan - facilitates a smooth migration from analogue to digital
- Send quick text messaging via programmable buttons
- DP 3401 can transmit GPS coordinates
- Privacy Options •
- VOX Capability
- Multiple Site Support (IP Site Connect)
GENERAL SPECIFICATIONS |
|
Channel Capacity | 32 |
Frequency | 136-174 MHz (VHF) |
403-470 MHz (UHF1) | |
450-512 MHz (UHF2) | |
Dimensions (HxWxL) | |
with NiMH Battery 1300mAH | 131.5 x 63.5 x 37.2 mm |
with LiIon Std Battery 1500mAH | 131.5 x 63.5 x 35.2 mm |
Weight | |
with NiMH Battery | 400 g |
with LiIon FM Battery | 340 g |
with LiIon HiCap Battery | 345 g |
with LiIon Std Battery | 330 g |
Power Supply | 7.2V nominal |
Average battery life at 5/5/90 duty cycle with battery saver enabled in carrier squelch and transmitter in high power | |
IMPRES LiIon Std Battery | Analogue: 9 hrs / Digital: 13 hrs |
IMPRES LiIon HiCap Battery | Analogue: 13.5hrs / Digital: 19 hrs |
IMPRES FM LiIon Battery | Analogue: 8.5 hrs / Digital: 12 hrs |
NiMH Battery | Analogue: 8 hrs / Digital: 11 hrs |
RECEIVER |
|
Frequency | 136-174 MHz (VHF) |
403-470 MHz (UHF1) | |
450-512 MHz (UHF2) | |
Channel Spacing | 12.5 kHz/ 20 kHz1/ 25 kHz |
Frequency Stability | +/- 1.5 ppm (DP 3400) |
( -30° C, +60° C, +25° C) | +/- 0.5 ppm (DP 3401) |
Analogue Sensitivity | 0.35 uV (12 dB SINAD) |
0.22 uV (typical) (12 dB SINAD) | |
0.4 uV (20 dB SINAD) | |
Digital Sensitivity | 5% BER: 0.3 uV |
Intermodulation | 65 dB |
Adjacent Channel Selectivity | 60 dB @ 12.5 kHz, |
70 dB @ 20/25 kHz | |
Spurious Rejection | 70 dB |
Rated Audio | 500 mW |
Audio Distortion @ Rated Audio | 3% (typical) |
Hum and Noise | -40 dB @ 12.5 kHz |
-45 dB @ 20/25 kHz | |
Audio Response | +1, -3 dB |
Conducted Spurious Emission | -57 dBm |
TRANSMITTER |
|
Frequency |
136-174 MHz (VHF) |
403-470 MHz (UHF1) |
|
450-512 MHz (UHF2) |
|
Channel Spacing |
12.5 kHz/ 20 kHz1/ 25 kHz |
Frequency Stability |
+/- 1.5 ppm (DP 3400) |
( -30° C, +60° C, +25° C) |
+/- 0.5 ppm (DP 3401) |
Power Output |
|
UHF1 and UHF2 |
1W and 4 W |
VHF |
1W and 5 W |
Modulation Limiting |
+/- 2.5 kHz @ 12.5 kHz |
+/- 4 kHz @ 20 kHz |
|
+/- 5.0 kHz @ 25 kHz |
|
FM Hum and Noise |
-40 dB @ 12.5 kHz |
-45 dB @ 20/25 kHz |
|
Conducted / Radiated Emission |
-36 dBm < 1 GHz |
-30dBm > 1GHz |
|
Adjacent Channel Power |
-60 dB @ 12.5 kHz |
-70 dB @ 20/25 kHz |
|
Audio Response |
+1, -3 dB |
Audio Distortion |
3% |
Digital Vocoder Type |
AMBE+2 |
Digital Protocol |
ETSI-TS 102 361-1, 2 & 3 |
GPS |
|
Accuracy specs are for long-term tracking (95th percentile values> 5 satellites visible at a nominal -130 dBm signal strength) |
|
TTFF (Time To First Fix) Cold Start | < 2 minutes |
TTFF (Time To First Fix) Hot Start | < 10 seconds |
Horizontal Accuracy | < 10 meters |
ENVIRONMENTAL SPECIFICATIONS |
|
Operating Temperature* | -30° C / +60° C |
Storage Temperature | -40° C / +85° C |
Temperature Shock | Per MIL-STD |
Humidity | Per MIL-STD |
Water Intrusion | EN60529 - IP57 |
Packaging Test | MIL-STD 810D and E |
* With LiIon battery, operating temperature specification is -10° C / +60° C. With NiMH battery, operating temperature specification is -20° C / +60° C |
MILITARY STANDARDS |
||||
810E | 810F | |||
Applicable MIL–STD |
Methods |
Procedures |
Method |
Procedures |
Low Pressure |
500.3 |
II |
500.4 |
II |
High Temperature |
501.3 |
I/A, II/A1 |
501.4 |
I/Hot, II/Hot |
Low Temperature |
502.3 |
I/C3, II/C1 |
502.4 |
I/C3, II/C1 |
Temperature Shock |
503.3 |
I/A, 1C3 |
503.4 |
I |
Solar Radiation |
505.3 |
I |
505.4 |
I |
Rain |
506.3 |
I,II |
506.4 |
I, III |
Humidity |
507.3 |
II |
507.4 |
- |
Salt Fog |
509.3 |
I |
509.4 |
I |
Dust |
510.3 |
I |
510.4 |
I |
Vibration |
514.4 |
I/10, II/3 |
514.5 |
I/24 |
Shock |
516.4 |
I, IV |
516.5 |
I, IV |